reichelt elektronik GmbH & Co. KG
Elektronikring 1
26452 Sande Germany

phone: +49 (0)4422 955-333
mail: info@reichelt.de
www.reichelt.de


DIAMEX USB ISP :: Programmer for AVR, STK500, ATmega, ATtiny, AT90


DIAMEX USB ISP

  • Product Description
  • Technical information
  • General
    • Type
    • Programmer
    • Modelname
    • DIAMEX USB ISP-PROGRAMMER
    • Design
    • For basic knowledge
    • Assembly
    • Housing
    • Socket
    • -
  • Specials
    • Protocoll
    • STK 500v2
  • Interfaces
    • USB
    • Yes
    • Interfaces
    • 6-pin plug
    • SPI
    • Yes SPI
  • Implementation
    • Transmission
    • Cable
    • Pieces
    • 3
  • Power supply
    • Low-voltage input
    • 5 V DC
    • Low-voltage connection
    • USB

DIAMEX USB ISP programmer for ATMEL AVR, STK500, ATmega, ATtiny, AT90
(Varying design, may differ slightly from picture - function is identical)

- Made in Germany -

If your ISP programmer has blown a fuse because the housing was too expensive, if data transfer is creeping at a snail's pace or if your passive parallel port progger is overdue for the scrap yard, it is time for this great piece of kit.

Extremely low-priced ISP programmer for ATMEL processors that are programmable via simple SPI interfaces. One noteworthy feature is the onboard processor with specially developed firmware that allows very fast programming cycles. The secret is dynamic use of programmer memory, which fills up whilst still being programmed. Even though the ISP programmer is a USB 2.0 device, a simple USB 1.1 PC port is also sufficient. Target voltage supply is possible via two DIL switches. Supply voltage can be set to 5 V or 3.3 V and switched on or off.

This little helper for professionals, hobbyists and ambitious amateurs is in USB stick format. Completely made in Germany.

Two integrated status LEDs indicate the current programmer status.

• Functions:
- FLASH, EEPROM, read/write fuse bits, lock bits, chip erase, read OSCCAL register

• Protocol:
- STK500v2

• Software support:
- AVR Studio (COM1..COM9) max. up to version 4.18
- AVRDUDE
Bascom with setting options->Programmer = STK500: C:ProgramsAtmelAVR ToolsSTK500stk500.exe and AVR Studio installed

• LEDs:
- USB LED: soft flash when idling, flash on USB activity
- Target LED: off when idling, flash when target accessed

• Installation:
- Native Windows drivers. Integration using simple *inf file from XP to Win7 (32 and 64-bit version)


• Supports the following chips:
Classic
AT90S1200, AT90S2313, AT90S2333, AT90S2343, AT90S4414, AT90S4433, AT90S4434, AT90S8515, AT90S8535

Tiny
ATtiny12, ATtiny13, ATtiny15, ATtiny2313, ATtiny24, ATtiny25, ATtiny26, ATtiny44, ATtiny45, ATtiny84, ATtiny85, Attiny86, ATtiny261, ATtiny461, ATtiny861

Mega
Atmega88, ATmega103, ATmega128, ATmega1280, ATmega1281, ATmega16, ATmega161, ATmega162, ATmega163, ATmega164, ATmega168, ATmega169, ATmega2560, ATmega2561, ATmega32, ATmega324, ATmega325, ATmega3250, ATmega329x, ATmega48, ATmega64, ATmega640, ATmega644, ATmega645, ATmega6450, ATmega649x, ATmega8, ATmega8515, ATmega8535,

Other
AT90CAN128, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B, AT90USB162, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287

All other ATMEGA processors that support the SPI programming interface.


• Special feature:
- Very fast programming cycle thanks to onboard processor and sophisticated firmware
- Target power supply 3.3 V maximum 120 mA, 5 V 150 - 500 mA depending on PC
- Requires no power supply from target

• Technical data and properties:
- Compatible with USB 1.1 and USB 2.0
- Very fast data transmission at 12 megabits
- Target power supply switchable between 5 V or 3.3 V (via professional low-drop regulator)
- Data transfer configurable using software, slower speeds selectable
- Own consumption: approx. 15 mA
- SMD industrial product on high-quality FR4 base material
- Transparent green USB stick incl. protective cap

• Included with delivery:
- ISP programmer in USB stick with protective cap
- ISP 6-pin connector, standard Atmel approx.15 cm
- Description incl. download URL of *inf file

Note:
(Varying design, may differ slightly from picture - function is identical)



Manufacturer : DIAMEX
Factory number : DIAMEX USB ISP-PROGRAMMER
Package weight : 0.095 kg
RoHS : conform
Technical information
  • General
    • Type
    • Programmer
    • Modelname
    • DIAMEX USB ISP-PROGRAMMER
    • Design
    • For basic knowledge
    • Assembly
    • Housing
    • Socket
    • -
  • Specials
    • Protocoll
    • STK 500v2
  • Interfaces
    • USB
    • Yes
    • Interfaces
    • 6-pin plug
    • SPI
    • Yes SPI
  • Implementation
    • Transmission
    • Cable
    • Pieces
    • 3
  • Power supply
    • Low-voltage input
    • 5 V DC
    • Low-voltage connection
    • USB