Notebook, PC Zubehör, Festplatte und Elektronik bei Reichelt at reichelt elektronik

reichelt elektronik GmbH & Co. KG
Elektronikring 1
26452 Sande Germany

phone: +49 (0)4422 955-333
mail: info@reichelt.de
www.reichelt.de


Categories

use filter

price


0 - 0

  • manufacturer
    • + more - less

  • Type
    • + more - less

  • Modelname
    • + more - less

  • Design
    • + more - less

  • Assembly
    • + more - less

  • Protocoll
    • + more - less

  • USB

  • Interfaces
    • + more - less

  • Transmission
    • + more - less


  • Programmer / Development Tools

  • page :
  •  1 - 16 of  86  items. 
 

The mTouch AR1100 Series Resistive Touch Screen Controller is a high-performance, low-cost, USB, universal touchscreen controller. Building on the AR1000 Series, the AR1100 adds USB mouse and USB digitiser modes to Microchip"s high-quality, low-cost touch controller portfolio. The AR1100 is available both as a chip and a production-ready board solution and supports any manufacturer"s 4-, 5-, or 8-wire analogue resistive touch screen.
Type: analogue resistive
Communication: RS-232, USB
Touchscreens jumper select, 4-wire, 5-wire, 8-wire
Power: 5.5 V DC ±5%
Operating temperature range: -40C to +85C
Resolution: 1024 x 1024
Pts per second: up to 140 pts/sec
Baud rates: std. 9600
Data format: 5
Driver support: standard drivers included

Weight incl.:

0,001 kg

 
  • Type:

    Developer tool

  • Modelname:

    AT30TK175STK

  • Design:

    For basic knowledge

  • Assembly:

    Board

  • USB:

    Yes

  • Interfaces:

    10-pin plug

  • Transmission:

    Printed circuit board

  • Socket:

    -

  • Pieces:

    4

Weight incl.:

0,076 kg

 
  • Type:

    Developer tool

  • Modelname:

    AT91SAM-ICE

  • Design:

    For advanced knowledge

  • Assembly:

    Housing

  • Protocoll:

    JTAG, JTAG ICE

  • USB:

    Yes

  • System requirements:

    Windows 2000/XP

  • Interfaces:

    10-pin plug

  • Transmission:

    Cable

  • Length:

    100 mm

  • Width:

    53 mm

  • Height:

    27 mm

  • Socket:

    Atmel AT91 ARM7/ARM9

  • Low-voltage input:

    5 V DC

  • Low-voltage connection:

    USB

Weight incl.:

0,37 kg

 
  • Low-voltage input:

    5 V DC

  • Low-voltage connection:

    USB

Weight incl.:

0,16 kg

 
  • Typ: Board
  • Supported Device: ATmega169
  • Supported Device Technology: Microcontroller
  • Maximum Clock Rate: 0.032 MHz
  • Program Memory Size: 4 MB
  • Program Memory Type: Data Flash
  • RS232: 1x
  • Display Type: LCD
  • IDE: AVR Butterfly - Application Rev07/AVR Butterfly - Bootloader rev04/AVR Studio 4
  • Main Program Memory Type: Flash

Weight incl.:

0,034 kg

 
  • Type:

    Developer tool

  • Modelname:

    AT AVR DRAGON

  • Design:

    For basic knowledge

  • Assembly:

    Board

  • Protocoll:

    ISP, JTAG, debugWIRE

  • USB:

    Yes

  • Interfaces:

    2 10-pin plugs > 2 6-pin plugs

  • Socket:

    AVR 8-bit and 32-bit socket

Weight incl.:

0,051 kg

 
  • Type:

    Programmer

  • Modelname:

    AT AVR ONE

  • Design:

    For expert knowledge

  • Assembly:

    Housing

  • Protocoll:

    SPI, JTAG, PDI, aWire

  • USB:

    Yes

  • System requirements:

    AVR32 Studio 2.5, EVK110x Evaluation Board

  • Transmission:

    Cable

  • Socket:

    -

  • Pieces:

    10

  • Power unit, inclusive:

    Yes

  • Mains voltage input:

    230 V AC

  • Mains frequency:

    50 Hz

  • Mains plug:

    C - Euro plug CEE 7/16

  • Power supply, on device:

    C8 - small device socket (m)

  • Low-voltage input:

    12 V DC

  • Low-voltage connection:

    DC panel jack, round, 2-pin

Weight incl.:

1,69 kg

 
  • Type:

    Evaluation Kit

  • Modelname:

    XMEGA-A1 XPLAINED

  • Design:

    For basic knowledge

  • Assembly:

    Board

  • Protocoll:

    JTAG, PDI

  • USB:

    Yes

  • System requirements:

    AVR Studio

  • Transmission:

    Cable

  • UART:

    Yes

  • Socket:

    -

Weight incl.:

0,046 kg

 
  • Type:

    Extension

  • Modelname:

    AT STK 600-Tiny10

  • Design:

    For basic knowledge

  • Assembly:

    Module

  • System requirements:

    Atmel STK600

  • Transmission:

    Pin, cable

  • Socket:

    -

Weight incl.:

0,078 kg

 
  • Supports JTAG, SWD, PDI, TPI, aWire, SPI and debugWIRE interfaces
  • Full source-level debugging in Atmel Studio
  • Supports all built-in hardware breakpoints in the target microcontroller (number depends on the OCD module in the target)
  • Up to 128 software breakpoints
  • 1.62 to 5.5V target operation
  • USB powered
  • Provides both ARM Cortex Debug Connector (10-pin) pin-out and AVR JTAG connector pin-out


Atmel-ICE is a powerful development tool for debugging and programming Atmel ARM® Cortex®-M based Atmel SAM and AVR®microcontrollers with on-chip debug capability.
Atmel-ICE supports:
  • Programming and on-chip debugging of all Atmel AVR 32-bit MCUs on both JTAG and aWire interfaces
  • Programming and on-chip debugging of all Atmel AVR XMEGA® family devices on both JTAG and PDI 2-wire interfaces
  • JTAG and SPI programming and debugging of all Atmel AVR 8-bit MCUs with OCD support on either JTAG or debugWIRE interfaces
  • Programming and debugging of all Atmel SAM ARM Cortex-M based MCUs on both SWD and JTAG interfaces
  • Programming of all Atmel tinyAVR® 8-bit MCUs with support for the TPI interface


Ships with the product
  • Atmel-ICE unit
  • USB cable (1.8m, high-speed, micro-B)
  • IDC flat cable with 10-pin 50-mil connector and 6-pin 100-mil connector

Weight incl.:

0,15 kg

 
  • Type:

    Evaluation Kit

  • Modelname:

    Atmel AVR STK 500

  • Design:

    For basic knowledge

  • Assembly:

    Board + module

  • Protocoll:

    ISP, HVSP

  • Transmission:

    Cable, printed circuit board

  • Connection entry:

    RS-232

  • Connection discharge:

    RS-232

  • UART:

    Yes

  • Socket:

    DIL-8.20.40

  • Pieces:

    12

  • Low-voltage input:

    10 - 15 V DC

  • Low-voltage connection:

    DC panel jack, round, 2-pin

Weight incl.:

0,91 kg

 
  • Type:

    Evaluation Kit

  • Modelname:

    AT STK 600

  • Design:

    For basic knowledge

  • Assembly:

    Board

  • Protocoll:

    ISP, PDI, JTAG, aWire

  • USB:

    Yes

  • Interfaces:

    CAN, LIN

  • Transmission:

    Pin, cable

  • Length:

    105 mm

  • Width:

    82 mm

  • Socket:

    -

  • Pieces:

    7

  • Low-voltage input:

    10 - 15 V DC

  • Low-voltage connection:

    DC panel jack, round, 2-pin

Weight incl.:

0,90 kg

 
  • Type:

    Developer tool

  • Modelname:

    Batronix BX32BATUPO

  • Design:

    For expert knowledge

  • Assembly:

    Unibase

  • USB:

    Yes

  • Transmission:

    Cable

  • Length:

    90 mm

  • Width:

    85 mm

  • Height:

    25 mm

  • Low-voltage input:

    5 V DC

  • Low-voltage connection:

    USB

Weight incl.:

0,33 kg

 
  • Type:

    Developer tool

  • Modelname:

    BX32P Barlino

  • Design:

    For expert knowledge

  • Assembly:

    Unibase

  • USB:

    Yes

  • Transmission:

    Cable

  • Length:

    90 mm

  • Width:

    85 mm

  • Height:

    25 mm

  • Low-voltage input:

    5 V DC

  • Low-voltage connection:

    USB

Weight incl.:

0,33 kg

 
  • Type:

    Developer tool

  • Modelname:

    BX 40 Bagero

  • Design:

    For expert knowledge

  • Assembly:

    Unibase

  • USB:

    Yes

  • Transmission:

    Cable

  • Length:

    153 mm

  • Width:

    85 mm

  • Height:

    25 mm

  • Low-voltage input:

    5 V DC

  • Low-voltage connection:

    USB

Weight incl.:

0,41 kg

 
  • Type:

    Developer tool

  • Modelname:

    BX 48 Batego II

  • Design:

    For expert knowledge

  • Assembly:

    Unibase

  • USB:

    Yes

  • Transmission:

    Cable

  • Length:

    137 mm

  • Width:

    85 mm

  • Height:

    25 mm

  • Low-voltage input:

    5 V DC

  • Low-voltage connection:

    USB

Weight incl.:

0,43 kg